If I am unaware of an HDD/SSD inside an enclosure but it is in an existing range, I will either leave the field blank or add ‘N/A’. I will continue to update this list periodically as further information and identifiers arise(as well as edit/amend as needed when contacted about errors). IMPORTANT – The following list is the result of hours or online research and cross-referencing on 14-4-23. This also massively identifies the drive as a ‘shucked drive’ and reduces the likely chances of a warranty even closer to 0%. Additionally, it is worth keeping in mind that although the HDD in many of these external drives have the same model ID as their bare drive equivalent, they may arrive as ‘white label’ drives – which is when the brand does not place the usual colourful/consumer friendly livery on the drive casing. In some case (especially in the case off 2.5″ drives, 3TB and 5TB drives) the drive inside is impossible to by conventionally as a bare drive in 2023 onwards. Do keep in mind that even the older drives are still available to buy on the likes of eBay and in Amazon’s seller directories. This list comprises a tonne of research from April 2023 and includes lots of current-gen and old-gen external drives from WD, Seagate and Toshiba online. If you are in any further doubt, I strongly recommend that you watch my video on the three reasons that Shucking hard drives is a GOOD thing (and three reasons it is NOT), as it will ensure you have the full factors and hurdles that you may encounter at your disposal before you spend a single penny! If you are still happy to proceed, let’s go!Ī List of Which HDD/SSD is inside Which External Drive from WD and Seagateīelow is a list of external Drives and the hard drive or SSD that have been recognized online inside them. Even if you are able to reintroduce the drive back into the casing without harm, there might still be unhidden seals that you have void’ed, or its connection via an internal interface such as SATA being registered on the drive’s internal logs. Shucking an HDD/SSD from a store-bought external drive case will, in most cases, completely invalidate your warranty.So, there is no real guarantee that a HDD/SSD used in an enclosure today will be the same drive in use in a later revision The HDD or SSD inside an external drive is always subject to change by the manufacturer at any time.Some External Drives use Partially/Fully attached Bridging boards on the internal HDD/SSD media inside, which (at best) will require additional removal or (at worst) make the internal drive completely unusual via a traditional SATA connection ( See example HERE – will open in new tab).So, before you open a single browser tab and visit your local eShop, make sure you remember the following: It is INCREDIBLY important that you know the risks when considering external drive shucking! Despite the savings that are possible compared with purchasing bare internal HDDs and SSDs, the catch is that it has never really been a 100% foolproof system of buying cheap drives. This is an ongoing process and one that is never going to be foolproof – but better something than nothing, right? Let’s begin. So, in today’s article, I want to talk you through a bunch of ways to identify the HDD/SSD inside an external drive without opening it, as well as highlight the risks you need to be aware of and finally shock my research after searching the internet for information to consolidate the drives inside many, many external drive enclosures from Seagate, WD and Toshiba. Therefore choosing the right external drive for shucking can have an element of luck and/or risk involved. But there is one little problem – that the brands VERY RARELY say which HDD or SSD they choose to use in their external drives. For whatever the reason, HDD and SSD Shucking still continues to be a desirable practice with cost-aware buyers online. As mentioned in THIS ARTICLE earlier this month, the reasons an external drive can often be cheaper can range from the drive inside being white labelled versions of a consumer drive, or the drive being allocated in bulk at production therefore removing it from the buy/sell/currency variables of bare drives or even simply that your USB 3.2 external drive is bottlenecking the real performance of the drive inside. For the uninitiated, shucking drives is the process of purchasing an external drive (eg a USB or Thunderbolt external storage drive in a sealed enclosure), then opening it up in efforts to get the drive inside – which can often work out cheaper than buying the bare internal drive on it’s own. If you are looking at making a significant saving on larger capacity HDDs or picking up much faster NVMe SSDs for a bargain price, then shucking will likely be one of the first methods that you have considered. 7.1 Related A Guide to Buying the Right USB Drive for Shucking Right – First Time
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |